Fairing for Forty Eight & Roadster 1200 CX

Price outside Europe with shipping (log in for tax free prices)

Fairing support and mounting harware : 121.66 euros

Fairing support/ Mounting hardware and fairing: 188.33 euros

Shiny black or matt black fairing and its support made by PIMPMYSPORTS for the Forty-Eight and the 1200 CX Roadster
This fairing is a great classic now available for the Roadster, the 48 but also the other Harley whose headlight is fixed on the lower fork T.
Small in size, however, it offers good efficiency by deviating part of the air flow.

It will finish the sporty look of your mount and mount easily.

For assembly: Basic tools and 30 to 40 minutes.
Before starting, protect your front mud guard with a blanket for example to avoid awkwardness. 

Spot the lightlight setting with a mark that picks up its tilt

Take apart the lighthouse from its support

Remove the torx under the top T which holds the clutch cable guide and replace it with the golden screw with the thick black washer against the T and then the kneecap.

Remove the torx under the top T which holds the clutch cable guide and replace it with the golden screw with the thick black washer against the T and then the kneecap.

position the fairing holder by sandwiching the headlight.

using the supplied screw start tightening so that the whole holds but leaves the ability to move headlight and bubble holder.

Hand over the lighthouse according to the brand (2/)

position the fairing on the stand and adjust the tilt of the fairing holder while keeping the headlight in its position (2/)

Squeeze the screw now headlight and bubble holder

loosen the counter nut inside the fairing holder and connect the nut to the kneecap.

Squeeze the counter nut

Install the fairing on the holder and put the bolt head covers